A lumineer is a very thin, tooth-colored covering bonded to the front surface of a tooth. It is commonly discussed as a type of cosmetic veneer used to change how teeth look. It is typically made from a ceramic material and held in place with dental adhesive (resin cement). Use and details vary by clinician, case, and manufacturer.
A minimal-prep veneer is a thin, tooth-colored covering bonded to the front surface of a tooth with very limited tooth reduction. It is commonly used to improve the look of front teeth by changing color, shape, or minor alignment appearance. It can be made from ceramic (porcelain-type materials) or composite resin, depending on the case and clinician preference. The goal is to preserve as much natural enamel as practical while still achieving a stable, natural-looking result.
A no-prep veneer is a thin veneer placed on the front surface of a tooth with little to no removal of tooth structure. It is usually bonded to enamel using dental adhesive and resin cement or composite resin. It is most commonly used for cosmetic changes to the front teeth, such as reshaping or masking mild color or surface defects. Case selection matters because adding material can change tooth thickness, contour, and bite relationships.
A composite veneer is a thin layer of tooth-colored resin material bonded to the front surface of a tooth. It is used to improve the appearance of teeth by changing shape, color, or minor alignment. Composite veneer is commonly placed chairside (in one visit) using light-cured composite resin. It may also be made indirectly and bonded later, depending on the technique and case.
A porcelain veneer is a thin, custom-made shell that bonds to the front surface of a tooth. It is made from dental ceramic (“porcelain”), designed to mimic natural enamel in color and translucency. It is commonly used on front teeth to change appearance and, in select cases, to restore minor damage. It is typically fabricated in a dental laboratory or milled with CAD/CAM and then cemented in the clinic.
A veneer is a thin, tooth-colored covering placed on the front surface of a tooth. It is used to change how a tooth looks, and in some cases to restore minor structural loss. Veneer materials commonly include dental ceramics (porcelain) and resin-based composite. It is most often used on front teeth, where appearance and edge shape are easily seen.
A subgingival margin is the edge of a dental restoration that sits below the gumline. It describes *where* the restoration meets the tooth in relation to the surrounding gingiva (gum tissue). It is commonly discussed with fillings, crowns, onlays, veneers, and bridgework. Its placement affects cleaning access, gum health, and how well a restoration can be sealed.
An equigingival margin is a dental restoration margin placed at the same level as the gumline. It describes *where* the edge of a filling, crown, veneer, or bonding ends relative to the gingiva (gums). It is commonly discussed when planning restorations near the cervical (neck) area of a tooth. It helps clinicians balance appearance, cleanability, and tissue health around the restoration.
A supragingival margin is the edge of a dental restoration that sits above the gumline (above the gingiva). It describes a location, not a specific material. It is commonly discussed when placing fillings, crowns, inlays/onlays, veneers, and other restorations. Clinicians often aim for a supragingival margin when feasible because it can be easier to keep clean and to work on.
biologic width is the natural “protective space” of soft tissue that attaches the gum to the tooth above the bone. It includes the gum’s attachment and sealing tissues that help keep the underlying bone and periodontal tissues healthy. Dentists consider biologic width when placing fillings, crowns, veneers, or other restorations near the gumline. In everyday terms, it is the room your gums need to stay stable and not chronically irritated by dental work.